| After-sales Service: | Available After Test |
|---|---|
| Warranty: | one year |
| Car Make: | Mercede-Bens |
| Engine Type: | OM651.930 2.2 CLA-200 CDI |
| Car Model: | A (W176) 12-18 200 d 16V |
| Fuel: | Diesel |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Figure 1 Cutaway of Mercede-Bens Fuel Pump A6510701801 contains the IMV valve A6510740084| Number | Cnt | Name | Usage | Remarks | |
| 5 | A6510701801 | 1 | HIGH-PRESSURE PUMP | "F117: SERIES PRODUCTION 117" | |
| Replaced By: A6510702601 | Or "F156: SERIES PRODUCTION 156" | ||||
| Or "F176: MODEL SERIES 176" | |||||
| Or "F246: SERIES PRODUCTION 246" | |||||
| Or "F091: PROJECT PASCALE" | |||||
| 5 | A6510702601 | 1 | HIGH-PRESSURE PUMP | "F117: SERIES PRODUCTION 117" | |
| Or "F156: SERIES PRODUCTION 156" | |||||
| Or "F176: MODEL SERIES 176" | |||||
| Or "F246: SERIES PRODUCTION 246" | |||||
| Or "F091: PROJECT PASCALE" | |||||
| 10 | A0009050800 | 1 | TEMPERATURE SENSOR | To Ident No: 30401961 | |
| To: 20.10.2010 | |||||
| 10 | A0051538328 | 1 | TEMPERATURE SENSOR | To Ident No: 30401961 | |
| Replaced By: A0009050800 | To: 20.10.2010 | ||||
| 30 | A0129970745 | 1 | SEALING RING | To Ident No: 30401961 | |
| To: 20.10.2010 | |||||
| 40 | A6510740084 | 1 | FLOW CONTROL VALVE | To Ident No: 30401961 | |
| To: 20.10.2010 | |||||
| 110 | N910143008004 | 3 | HEXALOBULAR BOLT | To Ident No: 30401961 | M8X35 |
| HIGH-PRESSURE PUMP TO CRANKCASE | To: 20.10.2010 | ||||
| 120 | A6510770412 | 1 | DRIVE GEAR | To Ident No: 30401961 | |
| To: 20.10.2010 | |||||
| 120 | A6510770512 | 1 | DRIVE GEAR | To Ident No: 30401961 | |
| To: 20.10.2010 | |||||
| 125 | A6519810006 | 1 | ANGULAR CONTACT BALL BRG. | To Ident No: 30401961 | |
| To: 20.10.2010 | |||||
| 130 | N000471060000 | 1 | RETAINING RING | ||
| 140 | A0009904710 | 1 | SCREW | M7X20.3 | |
| DRIVE GEAR TO CRANKCASE | |||||
| 150 | A6510770115 | 1 | COUPLING FLANGE | ||
| 160 | N910112014000 | 1 | HEXAGON NUT | ||
| COUPLING FLANGE TO HIGH-PRESSURE PUMP | |||||
| 170 | A6510770109 | 1 | CONNECTING DRUM | ||
| 180 | A0009828909 | 1 | PROTECTIVE CAP | ||
| FOR REPAIR TO CDI COMPONENTS | |||||
| 180 | A6460720004 | 1 | TS CLOSING COVER | ||
| Replaced By: A0009828909 | PARTS KIT | ||||
| 900 | A0225452026 | 1 | CLUTCH HOUSING | To Ident No: 30401961 | 2-PIN MLK1.2 |
| TEMPERATURE SENSOR | To: 20.10.2010 | ||||
| 901 | A0009823026 | NB | CRIMP RECEPTACLE CONTACT | To Ident No: 30401961 | 0.75-1.0 MM2 MLK1.2S |
| To: 20.10.2010 | |||||
| 901 | A0015455080 | NB | SINGLE-WIRE SEAL | To Ident No: 30401961 | 0.22-1.0 MM2 |
| To: 20.10.2010 | |||||
| 902 | A0525453826 | 1 | PLUG HOUSING | To Ident No: 30401961 | 2-PIN SLK2.8;M41/3 |
| HIGH-PRESSURE PUMP | To: 20.10.2010 | ||||
| 903 | A0005457680 | NB | GASKET | To Ident No: 30401961 | 2.2-3.0 MM |
| To: 20.10.2010 | |||||
| 903 | A0095458226 | NB | FEMALE CONTACT | To Ident No: 30401961 | 1.5-2.5 MM2 SLK2.8 |
| To: 20.10.2010 |
28508414 Fuel Metering Valve for Fuel Supply Pump used on Humber/GMC/Chevrolet Made by Henshine
The Fuel Inlet Metering Valve 28508414 is generally installed at the inlet of the Fuel Injection Pump. It is a proportional solenoid valve, controlled by the electronic control unit (ECU), which can control the amount of oil entering the high-pressure fuel pump, thereby controlling the oil pressure in the common rail pipe. The good work of this component can not only ensure that the vehicle can run normally but also enable the engine to run in the most fuel-efficient state to achieve the effect of saving fuel.
2022-10-16
Fuel Metering Valve
28508414 Fuel dispenser unit used for Common Rail System Hochdruckpumpe Repairment
+Diesel Common Rail System/Fuel System
-Components of High-pressure Pump/Fuel Supply Pump
-IMV Valve/Fuel Pressure Regulating Valve; Inlet Metering Valve
Ningbo Henshine Precision Machinery Co., Ltd
Detailed Photo:
FIGURE 1 Side View of Hyundai Metering Valve 28508414
(Courtesy of Ningbo Henshine Precision Machinery Co., Ltd)
Figure 3 Denso Overhaul Kit Valve 28508414 Fitting on 28277574 | Henshine Precision Machinery
(Courtesy of Ningbo Henshine Precision Machinery Co., Ltd)
| Make: | Hyundaii/ VW AG/ GMc/ OPEI/ Mecede-Bnes/ Chevrolett |
| Submodel: | HYUNDAI i20/ AUDI A1/ VOLKSWAGEN POLO/OPEI ANTARA / GM Orijinal |
| Engine Type: | / |
| Engine Family: | / |
| Engine Size: | / |
| Fuel Type: | Diesel |
| Regulator Usage: | Stock |
| Replaces OEM Part Number (application): | 331*700/ A 6*074*84/251*91/ 282**74 |
Condition: Brand NEW
Manufacturer Part Number: 28508414
Other Numbers: 16756-HG00B
Brand: HENSHINE
Material: plastic, iron
Delivery time: 5-12days
Colour: Silver & Brown
Surface Finish: High Quality
Placement on Vehicle: Mercede-Bens/Volkswagen/ ALIDI
Original Number: 331*700/A 6*074*84/282**74
Type: Fuel Pressure Regulator/ IMV
Packing: ODM/Customized/No 3/4 Natural Box & Henshine Box
Warranty: 12 Months
Min Order: 20 pcs
Production Capacity: 1100 pcs per month
Means of Transport: Ocean, Land, Air, Express
Payments: Visa, Mastercard, T/T, Online Transfer, Cash on pickup
A fuel pressure regulator also named a suction control valve, or SCV Valve helps maintain the fuel pressure in the Fuel
Injection System.
If the fuel injection system needs more fuel pressure, the fuel pressure regulator releases more fuel to go to the engine.
This is vital because that is how the fuel gets to the injectors. Blocking the pass-through to the fuel tank off completely,
the fuel pump will try to force too much fuel into the injectors which will cause them to fail and you will end up needing
another auto repair service.
As you could see, the pressure regulator plays a critical role in the common rail diesel injection system.
A good factory, a good supplier with stable quality, and follows IATF16949 rules strictly.
After being tested by many of our customers in Europe and the Americas, this pressure regulator is a good replacement
for OE diesel parts, like 28508414 Diesel Metering Valve.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}